Film-Tech Forum ARCHIVE: Part # for SH-1000

This is topic Part # for SH-1000 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006305

Posted by Don Sneed (Member # 955) on 06-25-2004, 02:38 AM:

I ran into a small problem with an Simplex SH-1000 soundhead, the lock screw is broken in the lateral mounting stud for the pressure roller adjustment, question: looking at the part # in the SH-1000 manual the # is SN-348, in today's Strong 5-star soundhead the part # is P-2294...will this mounting stud work in the old SH-1000 soundhead if I order it...the lateral pressure roller assy looks exactly like the SH-1000...any ideas..thanks

Posted by Paul G. Thompson (Member # 655) on 06-25-2004, 03:16 AM:

Take a chance on it. Simplex books have been re-written a million times (so it seems) and the part numbers have been updated. I found that out when a shaft busted on the lower holdback sprocket pad roller assy last week.

Posted by Michael Schaffer (Member # 1204) on 06-25-2004, 05:52 AM:

Even when you find the correct serial number, chances are that Ballantyne send you the wrong part anyway.

Posted by Ken Layton (Member # 133) on 06-25-2004, 09:28 AM:

I generally order SH-1000 parts from Wolk.

Posted by Juan Urias (Member # 1990) on 06-29-2004, 01:16 PM:

Yes they are exactly the same item.so yes it will work on your SH1000.