Film-Tech Forum ARCHIVE: Does Anyone Have a Manual for Kelmar AS-8200?

This is topic Does Anyone Have a Manual for Kelmar AS-8200? in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006443

Posted by Joshua Waaland (Member # 287) on 08-06-2004, 07:08 AM:

I recently purchased a Kelmar AS-8200 sound system to use until I can afford a digital sound system. It is in great shape but needs some new knobs and the fuse holders are broken. If I can't get a manual I guess I will have to try Newark. But I will need a wiring schematic too. Does anyone have a manual in PDF form or a xerox copy?

Also on the Kelmar website they list an audio input kit that isolates the two cells that you need when running a two projector system. How can I tell if this part has been installed in what I have? There is clearly markings on the inside that show where to wire the two projectors in. Is this it? Please look at the Kelmar website page here to see what I am talking about.

http://www.kelmarsystems.com/Audio/AudioCat/audiocat04.html

Thanks again for your help.

Josh

Posted by Edward Jurich (Member # 1787) on 08-06-2004, 08:23 AM:

You might try Kelmar, they could probably tell you what to look for to see if the 2-machine kit is installed. If the kit is not installed you could just wire up an external changeover switch. The 8200 looks like the mono units they made modified for stereo. I'd assume the inputs and outputs are marked on the terminal blocks.

Posted by Ken Layton (Member # 133) on 08-06-2004, 09:12 AM:

I say contact Kelmar directly and get the information straight from the horse's mouth.

Posted by Phil Hill (Member # 371) on 08-06-2004, 09:17 AM:

The 7200 listed in the manual section is basically the same thing...

>>> Phil

Posted by Don Sneed (Member # 955) on 08-08-2004, 12:10 AM:

Yes I just looked up a copy..it is the same as a AS-7200