Film-Tech Forum ARCHIVE: pad roller settings

This is topic pad roller settings in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006553

Posted by Neil Robinson (Member # 2459) on 09-10-2004, 10:27 PM:

Am i missing something here, how is the subject about the distances between pad rollers a lame topic as you put it Bill, the guy who carries his splicer between booths, see my other post CIR film splicers, I have always set the pad rollers on other type of projector at two film thicknesses, but was not sure about the victoria 5 as my cinema receieved the projector as new the pad rollers where set at one film thickness.

Posted by Brad Miller (Member # 2) on 09-10-2004, 10:45 PM:

Don't start new topics. Reply to existing ones.

Thread closed