Film-Tech Forum ARCHIVE: Need Part Number for Strong Highlight II Lamphouse

This is topic Need Part Number for Strong Highlight II Lamphouse in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006597

Posted by James R. Hammonds, Jr (Member # 673) on 09-22-2004, 06:30 PM:

I'm looking for a card inside the lower non-op door.
It has connections for the turret and the autofocus.
It also has something that says MICROTRAN on it, but I'm not sure what it is.
I also couldn't find it in the manual.

If anyone can help, I would appreciate it.

Posted by Chris Hipp (Member # 1788) on 09-23-2004, 09:36 AM:

try looking in your automation manual. I don't think that is part of the lamphouse.

Posted by Rick Long Jr (Member # 541) on 09-24-2004, 01:58 PM:

That's the control board for the "Constant illumination device". Not sure what the part number is, but if it's not working, it's probably the bridge just above that Micro Tran transformer. Had a few fail up here.

Posted by Nic Margherio (Member # 273) on 09-24-2004, 03:43 PM:

I have orederd that part before, I believe I got that part number off of the PCB itself. It should read something like "PCB ASSY. 51-xxxxxx."

Posted by James R. Hammonds, Jr (Member # 673) on 09-27-2004, 11:06 PM:

I looked in the automation manual (CNA 200) and couldn't find it.
I looked at the card also, but didn't find anything, but will look again.
Thanks for the help.

Posted by Ken Lackner (Member # 1002) on 09-27-2004, 11:09 PM:

If it's a turret controller, try looking in the projector manual.

Posted by Michael Schaffer (Member # 1204) on 09-28-2004, 05:07 AM:

Don't torture yourself any more. Just pick up the phone, call Strong and ask for somebody in cinema support, they have some very knowlegeable and friendly people there. The automations are not made inhouse, but I guarantee you they can tell you the right part number or point you to who to call.