Film-Tech Forum ARCHIVE: RCA 1050 Pad Roller Replacment

This is topic RCA 1050 Pad Roller Replacment in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006660

Posted by Paul Trimboli (Member # 1509) on 10-25-2004, 04:37 AM:

I have an RCA 1050 which I have rebuilt, it still has the old pad roller on the lateral guide roller that is metal covered in some sort of cloth, which is all nearly gone. I think I read that WOLK make a rubber replacement, but is there anything I can put over the metal roller and use? Heatshrink tube?

Posted by Bob Koch (Member # 1062) on 10-25-2004, 12:40 PM:

Buy an RCA 51961 roller from Wolk;or, if you write me I might have one around here.