Film-Tech Forum ARCHIVE: Need Manual For Christie H-20

This is topic Need Manual For Christie H-20 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006684

Posted by Mike Carro (Member # 232) on 11-03-2004, 02:53 PM:

I just picked up a Christie lamphouse model H 20. I can figure out where the DC leads go to but need to know exactly where the 110v leads attach to. I'm assuming it's a 110v blower motor and not a 220v. The H 30 and H 40 models seem to be a bit different. I'm currently using an old Strong/Singer Mighty Mite. And it has a 220v blower motor. Any help?

Posted by Tony Bandiera Jr (Member # 2365) on 11-05-2004, 03:32 PM:

Mike:

Email your address to me and I can send you a copy of the schematic. [Smile]

Posted by Mike Carro (Member # 232) on 11-09-2004, 11:14 AM:

Hi Tony, thanks but I contacted Christie and they sent me a copy.