Film-Tech Forum ARCHIVE: Schematic Wanted: ORC RPS-2500

This is topic Schematic Wanted: ORC RPS-2500 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006707

Posted by Gary M. Stanley (Member # 2798) on 11-12-2004, 12:27 AM:

Does anyone know where I can find a copy of the ORC RPS-2500 lamp and power supply schematic and operation book? This is the two part xenon lamp system that looks like an M-1000 lamphouse with seperate power supply. It's all beige and brown as all the ORC stuff was. I am in the midst of repairing 2 units and without a road map....

<email address deleted - please read the rules>

Posted by Adam Martin (Member # 641) on 11-12-2004, 01:39 AM:

This is not WTB/FS. Moving to FHF.

Posted by Paul Mayer (Member # 355) on 11-12-2004, 02:03 AM:

I have one. Contact me off list.

Posted by Josh Jones (Member # 447) on 11-12-2004, 03:27 AM:

RPS eh? you mean real piece of [bs]

Posted by Mark Gulbrandsen (Member # 72) on 11-12-2004, 04:24 PM:

Hi Gary! Which you stopped by more often.....

Be aware that there are two types of these that may have the same or similar model number.... one type is regulated(large heat simk inside about a foot long) and used germanium pass transistors in the regulator. NTE used to cross to them but they were over 30 bucks apiece... not sure of theya re even available or not any more..... and then there was a standard transformer type rectifier that is very simple to work on.... Both used the identical case.....

I have a regulated one that works fine that I have not been able to give away....!

Mark @ CLACO