Film-Tech Forum ARCHIVE: Blade: Trinity

This is topic Blade: Trinity - Credits overmatted in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006768

Posted by Steve Scott (Member # 630) on 12-09-2004, 05:48 PM:

Both prints of Blade: Trinity I received (about 2000 print numbers difference between the two) have a nice black line bordering the top of the image during the credits. And no, I did not misframe/missplice anything, there is a matte line on this scope feature, turn the framing knob and it will still be there.

Just to quell any WHAT'S WRONG WITH MY PRINT?!!! posts. [Smile]

Posted by Bill Gabel (Member # 1105) on 12-09-2004, 06:13 PM:

The studio prints that I've been handling for the last month are all like that.

Posted by Emma Tomiak (Member # 1862) on 12-09-2004, 11:06 PM:

Hmm, I was wondering what was up with that.

Posted by Steve Kraus (Member # 476) on 12-10-2004, 07:53 AM:

Matting with anamorphic...it's the new 3:1 aspect ratio! [Wink]

Posted by Mark J. Marshall (Member # 1409) on 12-10-2004, 08:58 AM:

As annoying as that can be, at least it's better than the credits bleedind PAST the frame line and overlapping on the top and bottom.

Posted by Dominic Espinosa (Member # 2122) on 12-10-2004, 12:13 PM:

Still makes it look like it's out of frame though. I'm not diggin' this crap.