Film-Tech Forum ARCHIVE: ALright!

This is topic ALright! in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006965

Posted by Dan Chilton (Member # 2288) on 02-19-2005, 09:38 AM:

Thanks Monte! The splicer is already set up to to hold two tape rolls, which is a nice feature. I'll check those sites out.

Posted by Gordon McLeod (Member # 33) on 02-19-2005, 12:26 PM:

This belongs under splicer blades not a new topic

Posted by Monte L Fullmer (Member # 2797) on 02-19-2005, 12:38 PM:

You're welcome on this info and always glad to help.

True, what Gord says - should have kept this in that previous topic heading.

Be wise to go back to your first note, goto edit and rename the topic header as "Neumade splicer questions", or something to that effect, so there will be more of a definite title than this "teaser" header (..a small warning to you..)for having definite topic headers are more easier to find in a reference database than this one posted.

For the one posted as a teaser has no direction on where to do pertaining to what involves the motion picture world.

..little tip and help for you.

Also, goto the "Manuals" tab on the left side, scroll down to "Misc", then you'll see a listing in PDF form for the Neumade splicers. In this, will be the 35SS "blown apart" of the parts listing if you need anymore parts for the Neumade.

Good luck with your rebuild of the 35MM SS

-Monte

Posted by Rachel Gilardi (Member # 1016) on 02-19-2005, 01:23 PM:

Please use the "Reply" button to reply to threads.

Closed.

[ 02-19-2005, 02:44 PM: Message edited by: Adam Martin ]