Film-Tech Forum ARCHIVE: Subwoofer not going through fader control on a CP200

This is topic Subwoofer not going through fader control on a CP200 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007041

Posted by John Westlund (Member # 913) on 03-19-2005, 08:27 PM:

We have a CP200 with DTS 6D. Its had a CAT 517, 560, and 137L and all the backplane modifications have been done. The subwoofer is hooked up like it says in the DTS manual and it is not controlled bye the fader. How do you have to hook the sub up so that it is? Thanks

Posted by Brad Miller (Member # 2) on 03-19-2005, 08:32 PM:

There are a couple of different wiring variations in the manual. Make sure you are looking at the correct one.

Posted by John Westlund (Member # 913) on 03-19-2005, 09:08 PM:

The manual has a diagram for a CP200 with SRD and a diagram for one without. I used the one without, but because of the upgrade cards should I used the other diagram?

Posted by Gordon McLeod (Member # 33) on 03-19-2005, 09:15 PM:

Wire it as if the da20 is present