Film-Tech Forum ARCHIVE: Water Cooling on Kinoton PK 60D

This is topic Water Cooling on Kinoton PK 60D in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007056

Posted by Chase Taylor (Member # 778) on 03-25-2005, 09:07 PM:

We are installing four PK 60D's and can not come up with a good place for the two water hoses come out of the projector housing. Any help is appreciated.

Thanks.

Posted by Brad Miller (Member # 2) on 03-25-2005, 09:30 PM:

I set the circulator directly underneath the projector head (since it is fairly deep) and run the hoses out of two existing 3/4" holes in the bottom of the PK60D. I'll have to take a pic to show you.

Posted by Pete Naples (Member # 761) on 03-26-2005, 03:21 AM:

Last ones I installed came from th efactory with the water hoses sticking out the bottom of the head. Unfortunately they were 6" too short to reach the factory supplied water cooler. Solved it by getting a joiner to build a small plinth to raise the cooler to reach the hoses.