Film-Tech Forum ARCHIVE: Speco Platter Problem

This is topic Speco Platter Problem in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007060

Posted by Ian Bailey (Member # 1752) on 03-26-2005, 07:55 PM:

Hi
I have an old Speco LP 1003 platter that is giving erratic feed from the top and bottom platter The centre platter seems to pay out fine.I have no information on this platter and cannot find a manual for it anywhere.Speco does not seem to like answering emails either!
I'm not sure how to get into the motor speed control parts under where the brain sits.Do you have to remove the Platter deck on this model to get at the parts?This platter does not have the same access under the brain as the LP 270's have.Any information will be very helpful as these two erratic decks are starting to cause problems.