Film-Tech Forum ARCHIVE: Panalogic Sound Defaults moving

This is topic Panalogic Sound Defaults moving in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007066

Posted by Phil Blake (Member # 2012) on 03-30-2005, 08:50 AM:

Running Panalogic Ca2000 , we have the non sync volume set to 3.5 , whe we power up the system at the start of the show , nonsync is 5.0 , we reset to 3.5 but next power up its back at 5.0 , anyone have any ideas to this ?

Posted by Oscar Neundorfer (Member # 458) on 03-31-2005, 07:24 AM:

Phil,

What sound processor are you using? Is this a new installation with this problem, or is this a new problem at an old installation?

I suspect the problem is with the sound processor more than with the Panalogic CA2000.

If you have more than one Panalogic CA2000 you might try swapping the RC140 control panel to see if the problem follows.

Posted by Phil Blake (Member # 2012) on 04-02-2005, 10:15 AM:

using DTS 6AdD processor , New problem , old installation.