Film-Tech Forum ARCHIVE: Can a Strong CNA-100 be programmed without a gateway card?

This is topic Can a Strong CNA-100 be programmed without a gateway card? in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007332

Posted by Jon Miller (Member # 163) on 07-12-2005, 09:09 PM:

The CNA-100 automation I installed in my home setup came with the bobble delay preset to about one second. I want to eliminate the delay, but there's no way I can justify the expense of a "CineNet" gateway card just to make one or two adjustments.

Assuming I have the software, is there a way to connect the automation's LSN port to the COM port of a PC for programming without having to buy a special interface?

TIA! [thumbsup]

Posted by Alan Gilbertson (Member # 242) on 07-12-2005, 09:25 PM:

Have you tried going in to the supervisory setup? I think you can set it in there. At least you can in the CNA-200.

Posted by Jon Miller (Member # 163) on 07-12-2005, 10:24 PM:

...And the CNA-150 as well, Alan. Unfortunately, the bottom-of-the-line '100 does not have an LCD and built-in supervisory features -- the host PC provides the supervisory functions.