Film-Tech Forum ARCHIVE: Help: DOLBY CAT 280 CARDS

This is topic Help: DOLBY CAT 280 CARDS in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007344

Posted by Martin Daian (Member # 1779) on 07-18-2005, 11:46 PM:

Hi, i have sold some CAT 280 SR cards made by DOLBY LABS to PACIFIC RECORDERS, i know that need a little modification to can be possible the use in the CP 50 processors, some people say about add a JUMPER but i don't know where i need to install this jumper, any help is appreciated, Martin

Posted by Steve Guttag (Member # 268) on 07-19-2005, 06:58 AM:

You actually REMOVE a jumper.

It is the jumper labled "A". You need not remove any covers to get to it. It is located by the edge connector (as are other jumpers so be sure you only cut the "A" jumper). That is all there is to it.

Posted by Martin Daian (Member # 1779) on 07-19-2005, 02:40 PM:

Thank you STEVE for your help, i have located the jumper labeled A, i will cut these jumper to solve the problem,

Martin Daian