This is topic Hey, You Rock! a.k.a Giving credit where it's due in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007360
Posted by Dominic Espinosa (Member # 2122) on 07-29-2005, 05:59 AM:
I'll have to check the print number but I think it was 3028.
Must Love Dogs, an example of Film Done Right!
I have a feeling it was a fellow Film-Techer who had this print for a sneak.
It had the following tell-tale signs of film-techery:
1.) Head leaders contained 1 ID frame while tail leaders did not
2.) No splice tape was left on from previous splices and no residue was left on the reel ends either.
3.) A single sided splice secured the leaders to the reels
4.) All reels had a piece of tape on the outside flange with a "fill line" on it
5.) All splices overlapped just slightly suggesting a modified splicer per the tips section
6.) The print wasn't damaged in ANY way.
7.) The tail of the final reel was protected by a clipping of an old trailer
8.) The tail tag was written properly, i.e. all sound formats were identified correctly. Even SR-D!
9.) It was clean, even at the reel ends!
Thanks, whoever you are. Keep up the good work!
Posted by Mike Olpin (Member # 1115) on 07-29-2005, 11:06 AM:
Existing topic
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2