Film-Tech Forum ARCHIVE: Splicing Tape Roll I.D.

This is topic Splicing Tape Roll I.D. in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007525

Posted by Daryl C. W. O'Shea (Member # 1303) on 10-12-2005, 08:27 PM:

Anybody know off hand the I.D. of a roll of Splycemar or Neumade splicing tape? I need to machine a replacement roller for my splicer.

Posted by Brad Miller (Member # 2) on 10-12-2005, 08:47 PM:

One inch

Posted by Daryl C. W. O'Shea (Member # 1303) on 10-12-2005, 10:13 PM:

Exactly? Thanks, I couldn't remember if it was 1.0" or 0.90".

Posted by Brad Miller (Member # 2) on 10-12-2005, 10:57 PM:

I don't have precision measuring tools here, but it sure looks to be dead on 1 inch.

Posted by Gregory N. Jones (Member # 805) on 10-13-2005, 09:23 AM:

Brad is correct, it is exactly 1" I.D.

Posted by Daryl C. W. O'Shea (Member # 1303) on 10-13-2005, 07:28 PM:

Thank ya sir.