Film-Tech Forum ARCHIVE: Kelmar AT-1200-PS Schematic error?

This is topic Kelmar AT-1200-PS Schematic error? in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007634

Posted by Daryl C. W. O'Shea (Member # 1303) on 11-23-2005, 11:39 PM:

I was just looking at the schematic for the AT-1200-PS (available from Film-Tech and Kelmar) and it appears that the labels for the analog pre-amp indicator and the analog LED indicator have been swapped.

Am I correct that the analog pre-amp indicator LED is really fed from the 12VDC supply (just like the pre-amp itself) and not the 5VDC supply?