Film-Tech Forum ARCHIVE: Filmguard Supplier in Australia?

This is topic Filmguard Supplier in Australia? in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007665

Posted by Ian Bailey (Member # 1752) on 12-06-2005, 01:35 AM:

Now that Panalogic has sold it's sole to the devil who is the supplier of Film-Guard products in Australia?
THX
Ian

Posted by Lindsay Morris (Member # 1430) on 12-06-2005, 02:04 AM:

Ian,

Try Panalogic Pty Ltd at Kellyville NSW on 02 9629 6572.

I have just topped up my supplies and got it from there.
Lindsay

Posted by Ian Bailey (Member # 1752) on 12-06-2005, 03:22 AM:

Thanks Lyndsay
I tried the phone number I had and got a recored message that the line had been disconnected.Then one of the opposition told me that they had closed their doors.
I'll give your number a go!
BTW Lyndsay I haven't had much time to play with you alignment tool but I'll get the measurements of it and try and make one up-and get yours back to you.The opening at Inverell with Potter went great-the town has been very positive towards us.

Posted by Nick Scott (Member # 2850) on 12-08-2005, 07:03 PM:

I believe Atlab image and sound is now suppling it. I hope so anyways there number is 02 9906 0100 and there in lane cove Sydney.

Posted by System Notices (Member # 2357) on 12-17-2008, 03:16 PM:

It has been 1104 days since the last post.

Posted by Cameron Glendinning (Member # 3516) on 12-17-2008, 03:16 PM:

Intec Pacific is the Australian distributor run by Spiro, formerly of Panastereo, He supplied me with filmguard, pads and Kelmar cleaners for the Palace Oxford St locations and the Valhalla, now closed! that gear now lives at United Avalon, Atlab I believe have been suppling them with filmguard as posted above.

I can not find Spiro's number at the moment, Mr Wilson could you please post it? I have had an message from W.A through this site asking for details.

Posted by Brad Miller (Member # 2) on 12-17-2008, 04:25 PM:

Intec Pacific
Grand Fl, 44 Carrington Road
Castle Hill
2154 Australia
0298944388

Posted by Michael Hossen (Member # 4274) on 12-18-2008, 08:21 PM:

Ahh, just the information I was after. Thanks guys!

So, can we get FilmGuard through Atlab too?

Posted by John Wilson (Member # 269) on 12-18-2008, 10:29 PM:

quote: Michael Hossen
So, can we get FilmGuard through Atlab too?

The only official supplier of FG in Australia is Intec Pacific.

Intec Pacific
Ground Floor
44 Carrington Road
Castle Hill NSW 2154
Australia
Phone: +61 (2) 9894 4388
intec@unwired.com.au

(Not Grand Floor [Wink]

)

quote: Cameron Glendinning
I can not find Spiro's number at the moment, Mr Wilson could you please post it? I have had an message from W.A through this site asking for details.

Gee Michael, how many people did you PM?

Posted by Ron Curran (Member # 3631) on 12-18-2008, 10:59 PM:

Yes John, no problems with supply.
I keep forgetting to ask Spiro if he wants the bottles back.

Posted by John Koutsoumis (Member # 1855) on 12-19-2008, 12:36 AM:

Atlab sell Filmguard too. But they don't stock the cleaning media. They have the Kelmar ones though.

Posted by John Wilson (Member # 269) on 12-19-2008, 01:14 AM:

Like I said...

quote: John Wilson
The only official supplier of FG in Australia is Intec Pacific.

Intec is the little guy. Buy from him if you can. [thumbsup]

Posted by Michael Hossen (Member # 4274) on 12-19-2008, 09:05 AM:

Ok, thanks guys. Will give the details of Intec to the powers that be...

Only PM'd you and Cameron John, the only two Aussies I could see that had posted about FG.

Posted by John Koutsoumis (Member # 1855) on 12-19-2008, 06:39 PM:

quote: John Wilson
Intec is the little guy. Buy from him if you can.

Agreed. I will be contacting him as I want to use the proper Film-tech cleaning media.

Posted by System Notices (Member # 2357) on 08-31-2012, 03:29 AM:

It has been 1350 days since the last post.

Posted by Rick Hunter (Member # 1606) on 08-31-2012, 03:29 AM:

their email bounces..

intec@unwired.com.au

...any current ideas?

Posted by Cameron Glendinning (Member # 3516) on 08-31-2012, 05:10 AM:

Hi Rick, I suggest you get it shipped directly from Brad Miller.

Posted by Lindsay Morris (Member # 1430) on 08-31-2012, 11:35 PM:

Spiro's EMail has changed from as listed on the Filmguard suppliers info section.

Rick you have a PM advising you of that change and Brad is about to also get one to have him update his listings of suppliers for FG.

Lindsay

Posted by Rick Hunter (Member # 1606) on 09-01-2012, 12:23 AM:

Thanks Lindsay [and Nick] got the pm.

Posted by Ian Parfrey (Member # 5122) on 09-02-2012, 02:11 AM:

Rick.
Spiro is your man at Intec- he's quick and a professional. Get your FilmGuard and media from him at -:

spiro@intecpacific.com.au

Cheers
Ian