This is topic Replacement lamp for Eumig S810D in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007754
Posted by Michael Barry (Member # 237) on 01-13-2006, 07:45 PM:
I hope this is the right forum for this - it's a technical question, although it's about 'amateur' equipment. Anyway...
I have the aforementioned Super/Standard 8 projector, which blew a lamp several months ago before I moved house. Although I intended to keep the old lamp so I could obtain the correct replacement for it, for some reason it has gone missing.
I'm sure that someone will know (probably off hand!) what kind of lamp fits this projector...the only thing I remember about it was that the voltage was a bit non-standard compared to a regular 12V/50W lamp. Someone will know.
Other than that, it runs very smoothly after all these years...
While I'm here, does anyone have any Eumig equipment?
Thanks ![[Smile]](smile.gif)
Posted by Brad Miller (Member # 2) on 01-13-2006, 08:06 PM:
http://8mmforum.film-tech.com
Posted by Michael Barry (Member # 237) on 01-13-2006, 08:30 PM:
Wow...I didn't know that forum existed! I doubt that there will be any problem getting help there.
Thanks, Brad!
Posted by Hugh McCullough (Member # 1542) on 01-14-2006, 05:35 AM:
Hello Michael.
According to my instruction manual your projector takes a 12v 100w A1/231 lamp.
This is the same as used in most photographic colour head enlargers.
Please go to http://www.donsbulbs.com/cgi-bin/r/b.pl/a1-231.html for more information.
Posted by Phil Blake (Member # 2012) on 01-15-2006, 01:12 AM:
these globes are easily obtainable in Australia , just bought 4 myself from local electrical supplier "Atkins carlyle" not sure if they exist in the East however would probably mail order.
Posted by System Notices (Member # 2357) on 06-22-2013, 11:16 AM:
It has been 2715 days since the last post.
Posted by Robert Crewdson (Member # 6256) on 06-22-2013, 11:16 AM:
I bought a Eumig 810D new in 1975, still going strong; great machine, kind to film. Only minus is that the magnetic head comes into contact with film when showing a silent movie. This resulted in me having to replace the head, so I didn't watch many silents after that. I bought the head from the now defunct? Johnson of Hendon, cost me half the price of the machine.
Posted by Leo Enticknap (Member # 534) on 06-22-2013, 04:38 PM:
These bulbs are very easily available on UK Ebay, by the look of things.
Posted by Michael Barry (Member # 237) on 06-28-2013, 12:18 AM:
Brilliant! I just noticed the replies - fantastic help guys, thanks!
Posted by Josef Grassmann (Member # 5149) on 08-27-2013, 03:30 PM:
Most 8mm film projectors show on label (back site or underneath projector) data for projection lamp e.g. lamp: 12 V / 100W
So Eumig has stated lamp data, too.