Film-Tech Forum ARCHIVE: Correct Position of Beam Spreader in ORC

This is topic Correct Position of Beam Spreader in ORC in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007825

Posted by Don Furr (Member # 1469) on 02-21-2006, 12:45 PM:

In a 1600/2500 ORC lamphouse, does the concave side of the spreader face the bulb or the screen?

Thanks...
Don

Posted by Monte L Fullmer (Member # 2797) on 02-21-2006, 01:37 PM:

...heard that the flat side towards screen. - Monte

Posted by Don Furr (Member # 1469) on 02-21-2006, 01:53 PM:

Thanks Monte.....that's what I thought but needed to be sure before closing the lamp back up. [thumbsup]

Don

Posted by Monte L Fullmer (Member # 2797) on 02-21-2006, 11:47 PM:

..just make sure that the lens is super clean (which I'm sure that you know this already...) thx-monte