Film-Tech Forum ARCHIVE: QSC 1400 power amp settings, help!

This is topic QSC 1400 power amp settings, help! in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007890

Posted by Dan Lyons (Member # 1454) on 03-28-2006, 05:01 PM:

Does anyone have a manual for this? I can't find one online. I need to know the configurations for the 8 dip switches on the back of the unit. The back of the unit tells me to refer to the manual. [Mad]

Posted by Joshua Waaland (Member # 287) on 03-28-2006, 07:23 PM:

Dan,

I have several copies. Send me your address and I will mail one to you. [thumbsup]

whale13@hotmail.com

Posted by Alan Roehr (Member # 2892) on 03-28-2006, 09:21 PM:

Here is what the manual says (in case you need it right away):

Switches 1,2 Bypass channel 2 octal input. Keep on for normal operation (i.e. when no octal accessory is used). Turn off when an octal accessory is plugged in.

Switches 7,8 Same as above for Channel 1.

Switches 3,4 allow the output from an octal accessory plugged into channel 1 to serve both channels. Turn on to feed the octal accessory to both channels. Turn off for normal operation or for using separate octal accessories.

Switches 5,6 Parallels the input jacks for Ch1 and Ch2.

Posted by Michael Schaffer (Member # 1204) on 03-29-2006, 02:05 AM:

See also here.

Posted by Dan Lyons (Member # 1454) on 03-29-2006, 03:00 AM:

How did I miss that in my search... [Eek!]

Problem solved. Thanks everyone!!! [thumbsup]