Film-Tech Forum ARCHIVE: Copying CP650 EQ settings

This is topic Copying CP650 EQ settings in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007934

Posted by Ken Lackner (Member # 1002) on 04-18-2006, 07:53 AM:

In the CP650 setup software, is there a way to quickly copy EQ settings from one channel to another? I could have sworn I saw this feature somewhere, but now I can't find it.

Posted by Oliver Pasch (Member # 1335) on 04-18-2006, 01:36 PM:

I can only tell from the German-"dub"-version of the setup-software: just right-click in the EQ-page of each channel and a small box appears where you can choose either to "copy from" (literally translated, don't know if this is what it exactly says in the english version) or "copy to"(same), each with a > that allows to choose the destinctive channel. The magic lies within the right-click... [Roll Eyes]

Posted by Ken Lackner (Member # 1002) on 04-18-2006, 02:51 PM:

Wow. I so would not have figured that out! Sure wish I had known that this morning. [Big Grin]

Posted by Jason Miller (Member # 2341) on 04-18-2006, 09:13 PM:

If you got the manual with the software it is listed on the top of page 2-22. or in the [2.6.1 Channels] section.