Film-Tech Forum ARCHIVE: christie ch10 igniter wiring?

This is topic christie ch10 igniter wiring? in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007968

Posted by Paul Montz (Member # 3741) on 04-30-2006, 07:38 PM:

my boss is a "smart Guy" and unwired my igniter. i have no idea what is the wiring schematic is for it. any help on this?

Posted by David Stambaugh (Member # 1102) on 04-30-2006, 07:54 PM:

Looks like the manual with wiring diagram is in the "Manuals" section here.

Posted by Monte L Fullmer (Member # 2797) on 04-30-2006, 08:36 PM:

kinda odd why he unwired the igniter..definitely a 'smart guy' yea, just have to be careful with those IGA10M igniters..

..bet he was trying to get the thing to strike up a bulb faster in playing with the tap on the resistor inside..and not knowing of that heater tube which can go out as well.,..

-monte

Posted by Paul Montz (Member # 3741) on 05-01-2006, 01:21 AM:

so the schematic worked really well except i can not designate where the s103 wire goes. i am not the greatest at reading these diagrams

Posted by John Pytlak (Member # 331) on 05-01-2006, 08:46 AM:

There's an important difference between a "smart guy" and a "wise guy". A "wise guy" is usually anything but.

Posted by Louis Bornwasser (Member # 3063) on 05-01-2006, 09:03 AM:

How does it become YOUR problem when the BOSS unwires something? Louis

Posted by Paul Montz (Member # 3741) on 05-01-2006, 07:08 PM:

yeah i fugured if i said smart guy it would keep me from saying all that colorfull language thats not appropriate. As for it becoming my problem when the boss screws up i have no idea why that is at this place, i guess he likes to have someone to blame when he screws things up

Posted by Monte L Fullmer (Member # 2797) on 05-01-2006, 10:55 PM:

quote: Paul Montz
I guess he likes to have someone to blame when he screws things up

..isn't that the typical operational format in the theatre business - blame the pawn for the king's mistakes?