Film-Tech Forum ARCHIVE: Looking for manual

This is topic Looking for manual - old X-90 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008004

Posted by Dave Macaulay (Member # 813) on 05-12-2006, 11:18 AM:

Does anyone have a manual for the X-90 before the lamp box appeared?
See picture:

Posted by Monte L Fullmer (Member # 2797) on 05-13-2006, 01:56 AM:

Got a bunch of them..since I have to babysit 18 of these critters.. and where you have the CPA-10 automations as well as mine do..

What is the 'vintage' on these consoles...look on the blue plate on the door..I've got 88 and 89 vintage X-90's.

What I done with the hour meter (since the hole mounts makes the meter being mount too far to the left to where you can't see the final digit..), is drilled two holes just right of the original holes so the meter can be shifted over to more center to where all 5 digits are shown in the plastic viewing window...

Holler at me via email if interested..thx-Monte
-Monte

Posted by William Collins (Member # 3773) on 05-14-2006, 01:05 AM:

Dont know if this is any good too you but have a look here:

http://www.strong-cinema.com/downloads/manuals/consoles/

your X-90 that you have looks similar to what Im working with now, although yours are older, as the ones I have were the last two off the production line.