Film-Tech Forum ARCHIVE: Shedding on X-Men 3

This is topic Shedding on X-Men 3 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008033

Posted by Dennis Benjamin (Member # 1137) on 05-27-2006, 05:20 PM:

Anyone else have a print of X-Men 3 that is shedding more than normal? The print I have has shed tremendously. I haven't seen it this bad since Schindler's List.

Posted by Brad Miller (Member # 2) on 05-27-2006, 07:16 PM:

Nope, no projector cleaning required at all here. Sounds like you've got something scuffing the film in one of your projector/platters.

Posted by Martin Ubilluz (Member # 3769) on 05-28-2006, 01:26 AM:

none at all has to do with your equipment the only prints that shred tremendously are black mylar prints

Posted by Jack Ondracek (Member # 1466) on 05-28-2006, 03:10 AM:

Running normally here... no problems.

Posted by John T. Hendrickson, Jr (Member # 849) on 05-28-2006, 07:15 AM:

Running four prints here. No problems.

Posted by Alex Grueneberg (Member # 2652) on 05-28-2006, 12:55 PM:

All four prints running fine, other then an unrelated lab problem with a reel.

Posted by Chad M Calpito (Member # 3736) on 05-28-2006, 01:52 PM:

No problems here as well. Prints are running good, being that I have 2 prints of the movie.

Posted by Ross Oba (Member # 3433) on 05-28-2006, 02:47 PM:

Three prints, but one of them is scratched already!!!! Our booth clown that worked Friday night scratched it. And it was the first day! But no shedding. I would definitely recommend running Filmguard on it for at least two shows.

Posted by Micah Linford (Member # 3823) on 06-04-2006, 02:09 PM:

I've got six prints in my booth and they're running clean.

Posted by Alex Cross (Member # 3520) on 06-07-2006, 02:48 AM:

Hi,

We have one. So bad the other day it caused a build up in the gate. In turn causing loss of focus. Backed off gate tension, been OK since.

Alex.