Film-Tech Forum ARCHIVE: Media Cleaner Threading Instructions.

This is topic Media Cleaner Threading Instructions. in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008096

Posted by Thomas Dieter (Member # 2507) on 06-23-2006, 03:26 PM:

I know that this is going to sound like a novice question, but this is not for me. I'm needing instructions for threading a Kelmar Media Cleaner that is mounted above the projector. The instructions are for a theatre in Colorado where the only person that might have an idea or brain to figure out how to thread it is the GM.

I've told people before to just follow the arrows on the cleaner, and they still can't figure it out, so I'm looking for some instructions with pictures if at all posible. I'm sure that some of you have seen someone load the media pads wrong before, even with the simple thread of the pads from the free spin spool, over 1 roller, to the take up spool. So if it includes in structions on loading the media pads, that would be awesome too.

Thanks in advance.
--Tom

Posted by Monte L Fullmer (Member # 2797) on 06-23-2006, 03:31 PM:

Hey Thomas...maybe this PDF file will help you out...

good luck-Monte