Film-Tech Forum ARCHIVE: Kintek KT90 replacement cones

This is topic Kintek KT90 replacement cones in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008290

Posted by William T. Parr (Member # 677) on 10-04-2006, 11:47 PM:

Anyone know of a replacement cone for Kintek KT90 subwoofer? I haveone that has gone bad and need to get it replaced.

Posted by Monte L Fullmer (Member # 2797) on 10-05-2006, 02:15 AM:

..have you cheked into having the basket reconed? Do a search on this service for there are plenty shops out there that do speaker reconing.

good luck - Monte

Posted by Gordon McLeod (Member # 33) on 10-05-2006, 07:04 AM:

I belive it was an eminence driver that was used though I think I remember seeing a RCF in one as well

Posted by Steve Guttag (Member # 268) on 10-05-2006, 08:24 AM:

All of the KT-90s I laid my hands on used RCF drivers...this is not to say that they didn't multi-source or change things later in life...the KT-90s I worked with were their early ones.