Film-Tech Forum ARCHIVE: OK, I give up! Where's a parts list for Potts feedout plates?

This is topic OK, I give up! Where's a parts list for Potts feedout plates? in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008510

Posted by Tim Reed (Member # 137) on 02-11-2007, 08:32 PM:

Title sez it all. Seems like every Potts/AP platter book I see has great exploded views and parts lists of every piece... except the feedout plates.

Looking for the standard microswitch version. Thx!

Posted by Dennis Benjamin (Member # 1137) on 02-11-2007, 08:40 PM:

I can get you one tomorrow.

Posted by Tim Reed (Member # 137) on 02-11-2007, 08:44 PM:

Thanks, Dennis! [Smile]

Posted by Dennis Benjamin (Member # 1137) on 02-12-2007, 09:41 AM:

I have it ready - just need an e-mail to send it to.

-Dennis

Posted by Adam Martin (Member # 641) on 02-12-2007, 12:28 PM:

Please email it to me as well so I can add it to the warehouse for everyone.

Posted by Dennis Benjamin (Member # 1137) on 02-12-2007, 01:51 PM:

Adam and Tim -

I just found a similar document in the Film-Tech Manual library: HERE

The one I scanned is not exactly the same, but almost. So you can just go under the Field Service Bulletin section and find what you are looking for.

-Dennis

Posted by Tim Reed (Member # 137) on 02-12-2007, 06:40 PM:

Thanks, again, Dennis. I was looking under "platters". Guess I should have went all the way through the list.

Posted by Joseph Muggio (Member # 4013) on 02-14-2007, 01:55 PM:

http://www.design-mfg.net/Platter/Pltr_PIBs/PIB_2150.pdf
http://www.design-mfg.net/Platter/Pltr_PIBs/PIB_2996.pdf

The control plate parts are listed at D&M's web site. These numbers correspond to Potts.