Film-Tech Forum ARCHIVE: Reverse Scan reader

This is topic Reverse Scan reader in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008726

Posted by Marc Jones (Member # 29) on 05-23-2007, 12:08 AM:

I am hooking up a kelmar reverse scan analog reader. The amplifier board on the back of the slit lense has terminals for Left (+) , Gnd , Left (-). From others experieance should I connect the ground to the shield on the beldon cable at the Reader or processor or both.
Thanks

Posted by Sam D. Chavez (Member # 1841) on 05-23-2007, 12:42 AM:

On the BACP readers you need to connect the shield at both ends. I assume Kelmar is the same.