Film-Tech Forum ARCHIVE: Card Edge Connectors for MPU Main PCB

This is topic Card Edge Connectors for MPU Main PCB in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008889

Posted by John Walsh (Member # 168) on 08-21-2007, 10:28 AM:

A friend needs to make a small magnetic preamp / switcher and is using two Cat. 92 boards (actually the new ones whos number I forget.) Does anyone have a source for those PC board sockets used on the MPU motherboard?

Posted by Gordon McLeod (Member # 33) on 08-21-2007, 01:10 PM:

I believe they are a british standard is .150" spacing of the pins not the NA standard of .156"

Posted by Mark Gulbrandsen (Member # 72) on 08-21-2007, 02:37 PM:

Actually they are standard spacing. The original Dolby MPU cabinets were made from Vector card cage kits. Have seen em several times.... I've also made up my own preamps for dailies using the CAT 92.

Mark

Posted by Gordon McLeod (Member # 33) on 08-21-2007, 06:37 PM:

I know the eq and NR cards are .150 spacing and I once remember another card having the spacing issue
Edac was the source I had for those edgestrips