Film-Tech Forum ARCHIVE: EAW SB-284C....B6 or not?

This is topic EAW SB-284C....B6 or not? in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009193

Posted by Nathan Tarpley (Member # 4476) on 03-19-2008, 07:16 PM:

Subject says it all. No answers from EAWs website, could not find answer on web, which leads me to believe it is not, but I wanted to consult the experts here.

Thanks

Nathan

Posted by Mark Gulbrandsen (Member # 72) on 03-19-2008, 08:10 PM:

EAW also has done alot of custom work for chains and other companies like Iwerks. I service an Iwerks system that has 4 way quad amped custom EAWs. Parts exist somewhat but its really more by luck.

Mark

Posted by Marco Giustini (Member # 4544) on 03-19-2008, 08:38 PM:

I'm still puzzled on B6 settings.

Watching the new DCM 2007 software setup, there are many JBL speakers on the internal database with B6 enabled.
But there is no instructions on JBL datasheet or website.
QSC told me that that settings were from JBL.

How can I know if some type of speaker needs B6? Just watching its frequency response? And what if I damage a speaker because B6 was not "supported"?

Marco