Film-Tech Forum ARCHIVE: Need Xetron XNR-335 Platter Info

This is topic Need Xetron XNR-335 Platter Info in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009278

Posted by Jim Cassedy (Member # 4115) on 05-12-2008, 10:39 AM:

I've just "inhereted" a couple of Xetron XNR-335 platter systems and I'm looking for tech info. I don't see them listed in the MANUALS section of Film-Tech. I looked at a couple of the STRONG platter manuals, and saw one that looked something like it, but was still different.

Are they known by some other name or model number?

What I'm really looking for is the wiring schematic.

Thanks!

Posted by Sean McKinnon (Member # 612) on 05-13-2008, 10:59 AM:

I know the NXP models were also known as the "Neutronic" but am not sure if the XNR models had another name. These are fairly simple systems and I am pretty familiar with them. If you have a specific question, or issue I may be able to help. Unfortunately I do not have a copy of the manual. There isn't much to them though. A Variac, Some resistors, and switches, and a motor. Let me know if there's anything I can do to help!

Posted by John Walsh (Member # 168) on 05-13-2008, 12:02 PM:

Hi, Jim; I've sent you a PM with my email address. I can send you the latest version of the XNR manual. I'm also sending a copy to Brad who will post it when he can.