This is topic CP55 nonsync center channel enable. in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.


To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009283

---

Posted by Josh Jones (Member # 447) on 05-14-2008, 09:42 AM:
 
I know I've done this before but I can't remember how I did it. I modified a CP55 to do pro logic. I've got two 243's that have the same diode configuration and wiring, but one will pass center channel the other will not.

Any ideas?

Josh
 

---

Powered by Infopop Corporation
UBB.classic^TM 6.3.1.2