Film-Tech Forum ARCHIVE: Error on CP650

This is topic Error on CP650 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009475

Posted by Jeremy M Smith (Member # 4913) on 08-18-2008, 04:23 AM:

My log has come up with this one error in a month and a half just thought I would check if anyone knows if I should be worried about this. As I can't find anything in the manual about errors

26-JUL-08 18:15:30 video= 0.250 volts BIST fail:video level:0.250 volts

Posted by Joe Redifer (Member # 3) on 08-18-2008, 08:49 AM:

Sounds like an issue with your Dolby Digital reader's LED.

Posted by Jeremy M Smith (Member # 4913) on 08-18-2008, 09:00 AM:

Fun we replaced them not to long ago. Maybe the power surply is on it's way out it's about 10 years old.

Posted by Marco Giustini (Member # 4544) on 08-18-2008, 12:21 PM:

I've the same warnings on my 650s. I think it's because the processor checks the video level of SRD at startup but since my LED are turned off when projector is not running, the 650 see no video level and warns you.

Until you have 4V while an SRD movie is running, you're ok.

Marco