Film-Tech Forum ARCHIVE: Shutter alignment for E-15

This is topic Shutter alignment for E-15 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009531

Posted by Danial Simmonds (Member # 4638) on 09-30-2008, 06:03 AM:

Hi everyone,

Just a quick question since i had laid into some trouble...

Ernemann 15 projector with lamphouse has very bad ghosting.
I did check the shutter alignment and found out the blade position is not correct.

So as a usual guy who does shutter alignment for christie and cinemeccanica i tried with this projector.

They are 4 nut screws to unlock the blade if i am not mistaken.
but the blade still didnt move. It is almost like it is jammed to the shaft.

Anyone ever experienced doing shutter alignment on this projector?

Regards
Dan