This is topic westrex 7000 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009572
Posted by Graeme Reekie (Member # 4995) on 10-25-2008, 05:15 PM:
I am wondering if anyone has any information on why my picture has become extremely unsteady. I have checked the cross box, changed the belts and checked the gate. I can see no problem.I cannot explain this.
Posted by Ben Wales (Member # 92) on 10-25-2008, 06:04 PM:
Several other pointers for Westrex 7000.
Has the Intermittant Sprocket been checked for Worn or Hooked teeth?.
Are the Gate Runner Bands worn and the Gate Lateral guide adjusted corectly?.
Posted by Graeme Reekie (Member # 4995) on 10-25-2008, 06:08 PM:
I replaced the int sprocket and the gate is correct.
It is a difficult one, can't understand why. My belief was it was either the gate or the belt, but all ok. The picture is not really bad but the westrex 7000s are normally rock steady.
Thanks
Posted by System Notices (Member # 2357) on 01-08-2015, 03:38 AM:
It has been 2265 days since the last post.