This is topic Smart TCX624a Crossover Problem in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.


To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009622

---

Posted by Raghavan Veera (Member # 4131) on 11-19-2008, 12:54 AM:
 
Hi this in Veera.

And i installed a new TCX624a(800 Hz)crossover in a screening room. While calibration there might be some variated response in Right channel and can any one get me problem of it.
i checked the IC's and relays on the board.
 

---

Posted by Eric Robinson (Member # 2966) on 11-19-2008, 09:46 AM:
 
Can you be more specific about:

1) How did you figure out the cause of the problem was this component?
2) Describe the variations you are experiencing.
 

---

Powered by Infopop Corporation
UBB.classic^TM 6.3.1.2