Film-Tech Forum ARCHIVE: ORC Reflector in Cinemeccanica Zenith X2000H lamphouse

This is topic ORC Reflector in Cinemeccanica Zenith X2000H lamphouse in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009885

Posted by Marin Zorica (Member # 1716) on 05-11-2009, 09:12 AM:

HI all!

I have problem here, got one Cinemec zenith X2000H lamphouse, but with ORC reflector, reflector can't fit originally, but if I move that springs in cinemec I can fit it, only I don't know how it should work?? And will I have same focus distances like with original reflector with cinemec....

On reflector are signature "ORC Electroformed Products", and above that number 292-86...or does anybody have any papers for that reflector.....as I must install this lamphouse I must know distance from reflector/lamp to film gate.

Posted by Jack Ondracek (Member # 1466) on 05-11-2009, 01:00 PM:

You might look up some of the ORC lamphouses in the manuals section of this site. The alignment sections should show the distances for the reflector you're using.

Posted by Marin Zorica (Member # 1716) on 05-11-2009, 02:55 PM:

They do have only film gate to lamphouse front panel meausre, I need lamp to reflector distance and reflector/lamp to film gate distance.