Film-Tech Forum ARCHIVE: Component Engineering Century LED assembly

This is topic Component Engineering Century LED assembly in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009892

Posted by Konrad Schiecke (Member # 393) on 05-15-2009, 01:22 PM:

I have a brand new Century analog LED assembly made by Component Engineering. What I need is one for a Simplex. There are four metal brackets that make up this assembly, The one that the led is mounted on, the bracket that has the boss to which the led bracket bolts to, the vertical bracket and the base bracket. For what i can see the only common bracket is the one that the led is mounted to. I have managed to get the simplex vertical and base bracket but cannot find the one with the boss. Does anyone have a spare boss bracket or would exchange a complete century assembly for a Simplex one?

Posted by Chris Slycord (Member # 4239) on 05-16-2009, 05:19 AM:

I'd call the Component Engineering offices. Everyone seems to indicate they're pretty reasonable for fixing these issues; they might even send you the necessary bracket for free if you're nice.

206-284-9171
http://www.componentengineering.com/contact.html

Though remember that they're on West Coast time.

Posted by Tony Bandiera Jr (Member # 2365) on 05-18-2009, 03:05 PM:

Konrad, PM me. I have an extra bracket I can send to you.