Film-Tech Forum ARCHIVE: CFS/Rentec Make Up Table

This is topic CFS/Rentec Make Up Table in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009913

Posted by Neil Robinson (Member # 2459) on 05-20-2009, 04:40 PM:

I am working part time in a cinema that has a make up table made by CFS/Rentec, Model EMTE, I am not familiar with this make or model, does anyone have any pictures of this make up table as I am sure if it has been modified as it is not possible to make up onto the center plate using the swivel roller and the bottom roller is fixed making it difficult to make up onto the bottom plate.

Posted by Randy Stankey (Member # 64) on 05-20-2009, 06:47 PM:

Have you checked the manuals section?

Posted by Neil Robinson (Member # 2459) on 05-20-2009, 07:24 PM:

Yes Randy, but there are only illustration's which do not clearly show the make up table, a picture of it would be a great help.

Posted by Robert Minichino (Member # 3495) on 05-20-2009, 07:27 PM:

Try the Reviews section, there's a CFS platter review there, with pictures of the MUT.

Posted by Thomas Moore (Member # 3427) on 05-27-2009, 01:17 AM:

i have the same equipment...but we are not allowed to post email adds here....i do have many screen names

on a variety of domains and messengers...such as

...etc etc etc

[ 05-27-2009, 03:20 AM: Message edited by: Brad Miller ]

Posted by Brad Miller (Member # 2) on 05-27-2009, 03:20 AM:

And the next time you intentionally try to circumvent the policies of this site your ass will be booted. Get it???

Posted by Neil Robinson (Member # 2459) on 05-29-2009, 05:03 PM:

Thomas, could you post some pictures of the MUT please.