This is topic Reflector repair exchange question. in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.


To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010070

Posted by Eric Robinson (Member # 2966) on 09-11-2009, 10:40 AM:
 
I have a damaged reflector, see pics below. Does anyone know of a repair exchange provider for this reflector?
Console / Lamphouse is XCN-35
Reflector diameter is approximately 11.5 inches
 -
 -
 
Posted by Tony Bandiera Jr (Member # 2365) on 09-11-2009, 11:08 AM:
 
Eric, contact Dick Niccum at Lighting Images Technology, 951-786-9999

Most reflectors (if not Dichroic or "cold coated" can be recoated with varying degrees of success.

In any event, Dick will probably have a good used or maybe even new reflector in stock.

Tell him Tony sent ya. [Big Grin]
 
Posted by Gordon McLeod (Member # 33) on 09-11-2009, 11:22 AM:
 
Neumade Xetron should be able to provide one otherwise UltraFlat can re polish it
 
Posted by Steve Guttag (Member # 268) on 09-11-2009, 11:44 AM:
 
Big Sky can also provide replacements for that type of reflector.

Steve
 
Posted by Louis Bornwasser (Member # 3063) on 09-11-2009, 12:11 PM:
 
You have a wonderful opportunity to upgrade to the Big Sky version of that reflector that eliminates the spyder (& has a lot more light.)

P/N BUR10spbs

Louis
 
Posted by Eric Robinson (Member # 2966) on 09-11-2009, 12:14 PM:
 
Any contact info for Big Sky?
 
Posted by Kenneth Wuepper (Member # 1174) on 09-11-2009, 03:35 PM:
 
Our Big Sky lamp house is terrific!

http://bigskyindustries.net/
 
Posted by Mark Gulbrandsen (Member # 72) on 09-11-2009, 06:40 PM:
 
Yes, either Neumade or Big Sky can provide a much higher quality reflector "conversion kit". Either also do away with that nasty spider supporting the front end of the lamp. That spider is NLA if you ever need one!!! Expect your light to at least double. In some instances I've even seen it triple. Make sure your exhaust blower and internal lampshouse blower are running at a par before installing the new reflector!!

Mark
 
Posted by Tony Bandiera Jr (Member # 2365) on 09-12-2009, 12:15 AM:
 
quote: Louis Bornwasser
You have a wonderful opportunity to upgrade to the Big Sky version of that reflector that eliminates the spyder (& has a lot more light.)

P/N BUR10spbs

Louis

Louis, do you sell that reflector? Can you PM me with price? [Big Grin]

I have a Xetron lamphouse and would love to eliminate that spyder. [Smile]
 
Posted by Tim Reed (Member # 137) on 09-12-2009, 01:05 AM:
 
Make sure you don't have an earlier version of that console, wherein the blower only runs when the bulb is on, or your new reflector will suffer the same fate. In that older version, the lamp switch only powers the blower motor. When the blower gets up to speed, the airflow switch pulls in to activate the rectifier AC contactor. It was really a backwards way to do it.

I've only seen one of the Big-Sky kits and I liked it, although, you can no longer use the black pivot lock knob because it doesn't fit underneath the new reflector. Either Big Sky doesn't supply a replacement lock knob in the kit, or they left it out of the one I had. Anyway, we got a wing nut and fender washer from the hardware store to make it work.
 
Posted by Bill Enos (Member # 440) on 09-15-2009, 09:21 PM:
 
How do recoated reflectors compare price wise to new?
 
Posted by Mark Gulbrandsen (Member # 72) on 09-16-2009, 09:42 PM:
 
Almost the same price as a new one Bill. Depending on how much your dealer discounts a new one can actually be alot cheaper. Another down side is that they can't really do a Dicro coating either... You will have to add in a heat filter driving the expense up even higher. I've seen a number of reflectors come back from Ultraflat and they do look really really nice though... Only for the obsolete stuff.

Mark
 
Posted by Eric Robinson (Member # 2966) on 09-21-2009, 02:46 AM:
 
quote: Tony Bandiera Jr
contact Dick Niccum at Lighting Images Technology
Thanks, got a reflector from Dick at 50% of the Big Sky price. Unfortunately this theatre has a slim budget, but I'll be happy to have some light back on the screen.

Thanks for the tip on the blowers, I'll check but I think I remember them running constantly.
 




Powered by Infopop Corporation
UBB.classicTM 6.3.1.2