Film-Tech Forum ARCHIVE: big sky platter system problem

This is topic big sky platter system problem in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010142

Posted by Mike Moreno (Member # 4887) on 10-19-2009, 01:23 PM:

i have a problem with a PSP-1352 speed control asembly from a big sky platter system. a few days ago diring a movie the platter system start to trhow smoke and the top platter stops spining. when tme movie finish i take a look to the system and the top platter didnt work as normal. it spins very slow.
i chek the circuit board and nothing looks bad, in fact i replace the speed control assembly from another platter system and it just work find. somebody have some advide?

thanks
mike moreno
mexico

Posted by Dennis M Dow Jr (Member # 1970) on 10-20-2009, 10:09 AM:

Mike just for clarification, you took the speed control assembly from another platter and used it in this one and it worked fine? If this is the case call the office at (908)454-6344 and ask for Mike Avallone and ask for a repair exchange on the assembly.