Film-Tech Forum ARCHIVE: Parts Needed

This is topic Parts Needed - Elmo XP 550 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010395

Posted by Bill Duelly (Member # 3612) on 03-22-2010, 09:48 PM:

Anyone know where to get parts for these 16mm projectors? I need some parts from the take up arm ASAP. Many thanks!

[ 03-25-2010, 07:18 PM: Message edited by: Adam Martin ]

Posted by John Wilson (Member # 269) on 03-22-2010, 09:51 PM:

Hi Bill

Have you tried the Film-Tech 16mm forum? Here it is.

Also, you may want to get rid of your email here else you may be bombarded with spam. We can find your email through the 'mail' button above.

John

Posted by Bill Duelly (Member # 3612) on 03-23-2010, 05:47 AM:

John, I did not know that there was a 16mm film-tech site as well. Thank you! (I tried to edit the email out but evidently there is a time limit on the edit functionality)

Posted by Jeff Taylor (Member # 443) on 03-25-2010, 06:07 PM:

Elmo just discontinued all of their factory 16mm parts sales at the end of 2009. I would try Rich Patchett at www.rcsclassic16mm.com. He specifically services Elmos and has a fair parts inventory. The other suggestion would be Rich Burgess who was an Elmo dealer in the DC area and works on them currently. I don't have his number, but he shows up on 16mmfilmtalk. I know he just redid the power supply on an XP. The final suggestion would be Larry Urbanski at Urbanski film--he's on the web and also deals in parts. Good luck.

[ 03-25-2010, 07:19 PM: Message edited by: Adam Martin ]