Film-Tech Forum ARCHIVE: Dolby cat 113c

This is topic Dolby cat 113c in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010452

Posted by Ken McFall (Member # 845) on 05-04-2010, 07:55 AM:

Dose anyone have a copy of the data/install manual for the cat 113c automation card. A friend has one and needs to know what the jumpers are for as there are no jumpers installed on the one he has.

While I have used them in the past I cannot recall any of the set up steps required.

Any help or info is appreciated.

Posted by Sam D. Chavez (Member # 1841) on 05-04-2010, 10:45 AM:

Ken,

I have instructions here someplace and will send it to you. Contact me directly as I have never setup my Outlook

Posted by Christos Mitsakis (Member # 143) on 05-04-2010, 11:04 AM:

Ken, it is here in the manual section of Film-Tech.

C.

Posted by Ken McFall (Member # 845) on 05-04-2010, 11:49 AM:

DOH! [Big Grin]

My mate phoned and asked me if I could get some info. I did ask him if he'd looked here first and he said he had so I took his word for it.....

Sam thanks for offering.... [thumbsup]

Christos thanks for making me feel stupid.... [thumbsup]

Posted by Christos Mitsakis (Member # 143) on 05-05-2010, 12:51 AM:

..your treat now... [beer]