This is topic JBL 4675c vs JBL 4675d in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010583
Posted by Peter Das (Member # 4690) on 08-26-2010, 08:23 PM:
can some one tell me whats the difference between JBL 4675c vs JBL 4675d
Posted by Steve Guttag (Member # 268) on 08-26-2010, 09:20 PM:
Well, for starters, there isn't a 4675d...so that is a pretty big difference.
Posted by Randy Stankey (Member # 64) on 08-26-2010, 09:40 PM:
The "4675C" doesn't exactly grow on trees, either!
Ask me how I know...
There is a "4675C-4(8)LF" which is the bi-amped version of the 4675C.
(No internal, passive crossover.)
There is also a "4670D" which has a very similar low frequency cabinet/drivers but a smaller horn on top.
Here's the web page from JBL which gives the breakdown on the 4000 Series of speakers.
http://www.jblpro.com/catalog/General/ProductFamily.aspx?FId=32&MId=1
Posted by Louis Bornwasser (Member # 3063) on 08-27-2010, 09:45 AM:
Careful there Randy, the 4670 has a significantly more "honky" horn. Otherwise the same components. Louis
Posted by Randy Stankey (Member # 64) on 08-27-2010, 10:27 AM:
I'm sure you're right. I never considered the sound characteristics of the 4670. Only the physical configuration.
Thus my characterization that the 4670 has the same or very similar cabinet on the bottom but a different horn on the top. That horn will, of course, sound different but I don't know because I haven't seen or heard one in person.
All of my knowledge was gained from my recent speaker replacement project where I did a lot of research into this line of speakers.
More of your knowledge is gained from actual experience with the product.
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2