Film-Tech Forum ARCHIVE: dts 6d to sdds

This is topic dts 6d to sdds in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010598

Posted by Rajendran Dinesh (Member # 5860) on 09-08-2010, 06:55 AM:

dear friends,
i have dts 6d , and Sony SDDS DFP 2000 Digital processor,
any passible for dts 6d to sony sdds aux 5.1 hook up,
i am not good for this field,
i ask any wrong question , please ignore this,

Posted by Marin Zorica (Member # 1716) on 09-08-2010, 03:42 PM:

You're asking on right place.....

Isn't problem to match DTS6D on system, only not true DFP-D2000, as it will just bypass it and send DTS signal directly to amplifiers (in case DFP is last in chain), so you won't have EQ and volume control that way.

What is you're main processor, which process analog sound? You should connect it to multi channel input of main processor (if you have [Smile]

), in that way you will have B chain (EQ) and volume control of DTS6D, plus you need to do some simple automation for DTS drop in

Posted by Rajendran Dinesh (Member # 5860) on 09-10-2010, 05:31 AM:

dear friend,thanks to ur reply, [beer]

i ask this type, please check this link,

http://my.picresize.com/AQRUUL4IXS/F431LIAM4OUR9RVZ0UN9

Posted by Marin Zorica (Member # 1716) on 09-10-2010, 06:56 AM:

That won't work! You will have sound from DTS, but without volume control and without EQ. SDDS 2000 just passes signal from AUX input to output, same like connecting DTS6 directly to amplifier. So, you need to connect DT6 to other processor, if you have it, so that you can control volume and have EQ.
What processor you use for optical sound?

Posted by Rajendran Dinesh (Member # 5860) on 09-10-2010, 12:04 PM:

dear friend, ok. i have cp50, i buy ebay, but how to connect sub-woofer line, i see dts to cp50 connection diagram , here use d458 board , but my processor, not here this board, where to buy this, i check our local cine market, but not here, u have this board, and u refer any ideas, [Smile]

Posted by Marin Zorica (Member # 1716) on 09-10-2010, 01:16 PM:

You can try to get that board at DTS support, which is no longer hold by DTS, but some other company, but if you write mail to DTS they will forward you.

Also, you could connect it without that board, well you need to cut some resistors off, because you need to import signal in CP50 path.
With this kind of modification you send signal from CP50 (L C R S) channels to DTS6, than back from DTS6 to CP50. This way if there is no DTS playing relay on DTS transformer board will just bypass channel from input to output, and if there is DTS it will switch to it. It's not so complex modification.
For Sub on CP50 you need to have CAT160 or 560 card, 560 is event better because you will have stereo surround then.
If you don't understand good, I could draw you simple schematic ow to do this, when I get some time to do so.

Posted by Rajendran Dinesh (Member # 5860) on 09-10-2010, 01:56 PM:

ok, friend, this is my projector, i buy this projector very old condition, i paint and some changes,
Link: http://my.picresize.com/M0BA2REOQC/8M0Q1SG852AU2YXMH8RK