Film-Tech Forum ARCHIVE: DTS XD20 Installation

This is topic DTS XD20 Installation in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010690

Posted by V.V.Tushit Vijay (Member # 5455) on 11-09-2010, 12:21 PM:

Hi ,
Is there any one installed the DTSXD20 . I had it here but we make it for Dual changer over system . But it miss-out form digital to analog format . while changeover. can any one suggest me regarding this .

Tusith

Posted by Mike B. Smith (Member # 2829) on 11-11-2010, 07:42 PM:

I just returned from Chennai India recently very friendly country.
I have installed quite a few XD20’s, what I think you are asking is why the XD20 is dropping out during the changeover between projectors. The XD20 requires a Y-cable for it to receive timecode input from projector 1 and projector 2, refer to the manual and make sure this cable has been made correctly. The XD20 will do its own seamless audio changeover and should not drop to analog. The analog changeover should not include switching timecode or the DTS audio, the XD20 will do that by itself. If you feel the cable is correct, observe the LED lights on the XD20 to see if anything is interrupted during the changeover.

Posted by V.V.Tushit Vijay (Member # 5455) on 11-11-2010, 09:32 PM:

Where Did you installed XD20'S. Me too from Chennai. And The cables are checked and Y cable is running but the timecode goes out.

regards,
V.V.Tusith

Posted by Rajendran Dinesh (Member # 5860) on 11-14-2010, 03:30 PM:

u need more details about xd20 , please call ur thala,
[thumbsup]