Film-Tech Forum ARCHIVE: Modifying CP50 for L/R/S operation

This is topic Modifying CP50 for L/R/S operation in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010699

Posted by Marin Zorica (Member # 1716) on 11-13-2010, 03:56 PM:

As I don't have mixer, is there any easy way to modify CP50 to send center to L and R channels? For CP65 you need to add two 6K4 resistor from center to each channel, can I do same here and add resistors on back panel from center output of decoder to L and R?

Posted by Gordon McLeod (Member # 33) on 11-14-2010, 12:30 AM:

there are three resistors that are the pad to the eq modules that you could do the summing at on the back plane