Film-Tech Forum ARCHIVE: sony dfp3000

This is topic sony dfp3000 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010716

Posted by Rajendran Dinesh (Member # 5860) on 11-25-2010, 01:46 PM:

i have sony dfp 3000 processor, i only use for aux input, and sr, and non-sync.i connect to pc, but this not connected, how to connect. i try my best i did not connect, tel me suggestions,
[beer]

Posted by Marin Zorica (Member # 1716) on 11-26-2010, 03:39 AM:

What kind of cable you use? Connect it to PC via RS232C port, but you must use null modem cable, not regular rs232 cable. If you want to make one you're own there is schematic of cable in DCP1000 manual.

Posted by V.V.Tushit Vijay (Member # 5455) on 11-26-2010, 10:00 AM:

Check the pin Connection of your cable . I thought your are using RS232 for connecting SDDS3000 . There may be a wast difference between he pins check this below.

RS232 pin outs.
1. Reversed
2. TXD Transmit Data
3. RXD Receive Data
4. Reserved
5. Signal Ground
6. Reserved
7. CTS Clear to send
8. RTS Request to send
9. +5v for Blue tooth.

Rs232c

1. NC
2. RXD
3. TXD
4. DTR
5. GND
6. NC
7. RTS
8. CTS
9. NC

Check Pin 2&3 and Pin 7&8 Were reversed

Hope the information is help full for your project.

V.V